Course Sequence by Term
The following is the suggested course sequence by term. Please keep in mind:
- Students should meet with an academic advisor to develop an individual education plan that meets their academic and career goals. Use the Pathway Planner tool in yourStudent Centerto manage your plan.
- The course sequence is laid out by suggested term and may be affected when students enter the program at different times of the year.
- Initial course placement is determined by current district placement measures and/or completion of 100-200 level course and/or program requirements.
- Degree and transfer seeking students may be required to successfully complete a MCCCD First Year Experience Course (FYE) within the first two semesters at a MCCCD College. Courses include FYE101 and FYE103. Course offerings will vary by college. See an academic, program, or faculty advisor for details.
- 咨询你的教师导师或学术advisor to determine educational requirements, including possible university transfer options, for your chosen career field.
Pathway Map Options
There are multiple options available for this pathway map. These options vary depending on the locations, partners, and available tracks of the award.
These pathway map options may share some common coursework. To explore what additional coursework may be required, select your desired option from the list below. Once selected, the list of courses and any associated details will be automatically updated in the course sequence below. The differences between individual pathway map options may only be a few courses.
Note:You will have to select one of the options below to view available course sequences.
The list of courses below has been updated
Full-time Sequence
To view course sequences,select one of the pathway map options above.
Full-time status is 12 credits to 18 credits per semester.
Note:Because you are viewing this pathway map on a mobile device, some columns below have been hidden. To view all columns, please rotate your device or view this page on a device with a larger screen.
Term 1
Course Number | Course Name | Requisites | Notes | Area | Credits |
---|---|---|---|---|---|
MPT101MP | Technical Documentation | 3 | |||
MPT110MP | Inspection Techniques | Critical courseGateway course | 3 | ||
MPT150 | Introduction to SolidWorks | 3 | |||
MPT130MPor MPT131MP |
CNC Machine OperatororCNC Machining Level I | Students who have successfully completed the microcertification in CNC Machine Operator (MPT130MP) do not need to takeMPT131MP. | 6 | ||
ENG101or ENG107 |
First-Year CompositionorFirst-Year Composition for ESL | Prerequisites: Writing test score or (C or better inENG091orESL097orWAC101) or (B or better inALT100) or (ALT100& Corequisites:ENG101LLorENG107LLorWAC101orENG100A+) or (ESL202& Corequisites:ENG101LLorENG107LLorWAC101orENG100A+).orPrerequisites: Writing test score or (C or better inENG091orESL097orWAC101) or (B or better inALT100) or (ALT100& Corequisites:ENG101LLorENG107LLorWAC101orENG100A+) or (ESL202& Corequisites:ENG101LLorENG107LLorWAC101orENG100A+). | Critical course | FYC | 3 |
FYE101or FYE103 |
Introduction to College, Career and Personal SuccessorExploration of College, Career and Personal Success | 1–3 |
Term 2
Course Number | Course Name | Requisites | Notes | Area | Credits |
---|---|---|---|---|---|
MPT140 | Manual CNC Programming | Prerequisites: A grade of C or better in (MPT130orMPT130MP) or (MPT131orMPT131MP), or machine shop experience or permission of Program Director. | 3 | ||
MPT120MP | Introduction to Manual Machining | Prerequisites or Corequisites: (MPT101orMPT101MP) and (MPT111orMPT111MP), or permission of Program Director. | 4 | ||
RE | Restricted Electives | Recommended:MFG220/MFG221 | 3 | ||
MPT132MP | CNC Machining Level II | Prerequisites: A grade of C or better inMPT130, orMPT130MP, orMPT131, orMPT131MP, or permission of Program Director. | 3 | ||
MAT14+or MAT15+ |
College MathematicsorCollege Algebra/Functions | Critical courseFor students intending to transfer into a STEM related field, recommendMAT150College Algebra/Functions or higher. | MA | 3–6 |
Term 3
Course Number | Course Name | Requisites | Notes | Area | Credits |
---|---|---|---|---|---|
MPT111MP | Geometric Dimensioning and Tolerance (GDT) | 3 | |||
MPT260MP | Computer Aided Manufacturing (CAM) I | Prerequisites: A grade of C or better inMPT130, orMPT130MP, orMPT131, orMPT131MP, or permission of Program Director. | 3 | ||
MPT270 | Tooling, Fixtures, and Gauges | Prerequisites: A grade of C or better in [(MPT120, orMPT120MP, or four NIMS in CNC Machining or Manual Machining) and (MPT150orMPT151)], orCAD101, orCAD201, or Certified SolidWorks Associate (CSWA), or permission of Program Director. | 3 | ||
RE | Restricted Electives | Recommended:MFG220/MFG221 | 3–4 | ||
CRE101 | College Critical Reading and Critical Thinking | Prerequisites: A grade of C or better in (ENG101orENG107) and (RDG095orRDG100orRDG111orRDG112orRDG113or an appropriate district placement or permission of Instructor). | L | 0–3 | |
COM100or COM110or COM225or COM230 |
Introduction to Human CommunicationorInterpersonal CommunicationorPublic SpeakingorSmall Group Communication | No requisitesorNo requisitesorPrerequisites: A grade of C or better inENG101, orENG107, or equivalent.orNo requisites | Recommended:COM230 | SBorL | 3 |
Term 4
Course Number | Course Name | Requisites | Notes | Area | Credits |
---|---|---|---|---|---|
MPT262MP | Computer Aided Manufacturing (CAM) II | Prerequisites: A grade of C or better inMPT260, orMPT260MP, or permission of Program Director. | 3 | ||
ENG102or ENG108 |
First-Year CompositionorFirst-Year Composition for ESL | Prerequisites: Grade of C or better inENG101.orPrerequisites: A grade of C or better inENG107. | FYC | 3 | |
SB | Social & Behavioral Sciences | SB | 3 | ||
SQ or SG | Natural Sciences | For students intending to transfer into a STEM related field, the following courses are recommended: (CHM150AND CHM151LLOR CHM150AA) OR (CHM151ANDCHM151LL) ORCHM151AA OR (PHY115OR PHY121). |
SQ | 4–5 | |
HU | Humanities, Fine Arts & Design | HU | 3 |
Part-time Sequence
To view course sequences,select one of the pathway map options above.
Part-time status is 11 credit hours or less.
Note:Because you are viewing this pathway map on a mobile device, some columns below have been hidden. To view all columns, please rotate your device or view this page on a device with a larger screen.
Term 1
Course Number | Course Name | Requisites | Notes | Area | Credits |
---|---|---|---|---|---|
MPT101MP | Technical Documentation | Critical course | 3 | ||
MPT110MP | Inspection Techniques | Critical courseGateway course | 3 | ||
FYE101or FYE103 |
Introduction to College, Career and Personal SuccessorExploration of College, Career and Personal Success | 1–3 |
Term 2
Course Number | Course Name | Requisites | Notes | Area | Credits |
---|---|---|---|---|---|
MPT150 | Introduction to SolidWorks | 3 | |||
ENG101or ENG107 |
First-Year CompositionorFirst-Year Composition for ESL | Prerequisites: Writing test score or (C or better inENG091orESL097orWAC101) or (B or better inALT100) or (ALT100& Corequisites:ENG101LLorENG107LLorWAC101orENG100A+) or (ESL202& Corequisites:ENG101LLorENG107LLorWAC101orENG100A+).orPrerequisites: Writing test score or (C or better inENG091orESL097orWAC101) or (B or better inALT100) or (ALT100& Corequisites:ENG101LLorENG107LLorWAC101orENG100A+) or (ESL202& Corequisites:ENG101LLorENG107LLorWAC101orENG100A+). | Critical course | FYC | 3 |
Term 3
Course Number | Course Name | Requisites | Notes | Area | Credits |
---|---|---|---|---|---|
MPT120MP | Introduction to Manual Machining | Prerequisites or Corequisites: (MPT101orMPT101MP) and (MPT111orMPT111MP), or permission of Program Director. | 4 | ||
MPT111MP | Geometric Dimensioning and Tolerance (GDT) | 3 |
Term 4
Course Number | Course Name | Requisites | Notes | Area | Credits |
---|---|---|---|---|---|
MPT131MP | CNC Machining Level I | Students who have successfully completed the microcertification in CNC Machine Operator (MPT130MP) do not need to takeMPT131MP. | 6 | ||
MPT140 | Manual CNC Programming | Prerequisites: A grade of C or better in (MPT130orMPT130MP) or (MPT131orMPT131MP), or machine shop experience or permission of Program Director. | 3 | ||
MAT14+or MAT15+ |
College MathematicsorCollege Algebra/Functions | Critical courseFor students intending to transfer into a STEM related field, recommendMAT150College Algebra/Functions or higher. | MA | 3–6 |
Term 5
Course Number | Course Name | Requisites | Notes | Area | Credits |
---|---|---|---|---|---|
MPT132MP | CNC Machining Level II | Prerequisites: A grade of C or better inMPT130, orMPT130MP, orMPT131, orMPT131MP, or permission of Program Director. | 3 | ||
MPT260MP | Computer Aided Manufacturing (CAM) I | Prerequisites: A grade of C or better inMPT130, orMPT130MP, orMPT131, orMPT131MP, or permission of Program Director. | 3 | ||
CRE101 | College Critical Reading and Critical Thinking | Prerequisites: A grade of C or better in [(ENG101orENG107) and (RDG095orRDG100orRDG100LLorRDG111orRDG112orRDG113)] or a grade of B or better inALT100or an appropriate district placement or permission of Instructor. | L | 3 |
Term 6
Course Number | Course Name | Requisites | Notes | Area | Credits |
---|---|---|---|---|---|
RE | Restricted Electives | Recommended:MFG220/MFG221 | 3 | ||
COM100or COM110or COM225or COM230 |
Introduction to Human CommunicationorInterpersonal CommunicationorPublic SpeakingorSmall Group Communication | No requisitesorNo requisitesorPrerequisites: A grade of C or better inENG101, orENG107, or equivalent.orNo requisites | Recommended:COM230 | SBorL | 3 |
Term 7
Course Number | Course Name | Requisites | Notes | Area | Credits |
---|---|---|---|---|---|
MPT270 | Tooling, Fixtures, and Gauges | Prerequisites: A grade of C or better in [(MPT120, orMPT120MP, or four NIMS in CNC Machining or Manual Machining) and (MPT150orMPT151)], orCAD101, orCAD201, or Certified SolidWorks Associate (CSWA), or permission of Program Director. | 3 | ||
RE | Restricted Electives | 3–4 |
Term 8
Course Number | Course Name | Requisites | Notes | Area | Credits |
---|---|---|---|---|---|
MPT262MP | Computer Aided Manufacturing (CAM) II | 3 | |||
ENG102or ENG108 |
First-Year CompositionorFirst-Year Composition for ESL | Prerequisites: Grade of C or better inENG101.orPrerequisites: A grade of C or better inENG107. | FYC | 3 |
Term 9
Course Number | Course Name | Requisites | Notes | Area | Credits |
---|---|---|---|---|---|
SB | Social & Behavioral Sciences | SB | 3 | ||
HU | Humanities, Fine Arts & Design | HU | 3 |
Term 10
Course Number | Course Name | Requisites | Notes | Area | Credits |
---|---|---|---|---|---|
SQ or SG | Natural Sciences | For students intending to transfer into a STEM related field, the following courses are recommended: (CHM150AND CHM151LLOR CHM150AA) OR (CHM151ANDCHM151LL) ORCHM151AA OR (PHY115OR PHY121). |
SQ | 4–5 |
Pathway Map Option Details
No pathway map option has been selected. Please select from thepathway map optionslisted above.
Course Area Key
Gateway Course= Generally the first major-specific course in a pathway.
Critical Course= A course that is highly predictive of future success in a pathway.
- FYC= First Year Composition
- HU= Humanities, Fine Arts, and Design
- L= Literacy & Critical Inquiry
- MA= Mathematics
- SB= Social-Behavioral Sciences
- SQ= Natural Sciences Quantitative